-- extracted from rfc2837.txt
-- at Thu Jun 1 07:07:27 2000
FIBRE-CHANNEL-FE-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
Unsigned32,
Counter32,
Gauge32,
Integer32,
mib-2
FROM SNMPv2-SMI
TEXTUAL-CONVENTION,
TruthValue,
TimeStamp
FROM SNMPv2-TC
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
MODULE-COMPLIANCE,
OBJECT-GROUP
FROM SNMPv2-CONF;
fcFeMIB MODULE-IDENTITY
LAST-UPDATED "200005180000Z" -- May 18, 2000 12:00:00 AM
ORGANIZATION "IETF IPFC Working Group"
CONTACT-INFO
"Kha Sin Teow
Brocade Communications Systems,
1901 Guadalupe Parkway,
San Jose, CA 95131
U.S.A
Tel: +1 408 487 8180
Fax: +1 408 487 8190
Email: khasin@Brocade.COM
WG Mailing list:ipfc@standards.gadzoox.com
To Subscribe: ipfc-request@standards.gadzoox.com
In Body: subscribe"
DESCRIPTION
"The MIB module for Fibre Channel Fabric Element."
REVISION "200005180000Z" -- May 18, 2000 12:00:00 AM
DESCRIPTION
"Initial revision, published as RFC 2837."
-- 1.3.6.1.2.1.75 -- ::= { mib-2 75 }
-- Textual Conventions
MilliSeconds ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents time unit value in milliseconds."
SYNTAX Unsigned32
MicroSeconds ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents time unit value in microseconds."
SYNTAX Unsigned32
FcNameId ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents the Worldwide Name associated with
a Fibre Channel (FC) entity."
SYNTAX OCTET STRING (SIZE (8))
FcAddressId ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents Fibre Channel Address ID, a 24-bit
value unique within the address space of a Fabric."
SYNTAX OCTET STRING (SIZE (3))
FcRxDataFieldSize ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents the receive data field size of an
NxPort or FxPort."
SYNTAX Integer32 (128..2112)
FcBbCredit ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents the buffer-to-buffer credit of an
NxPort or FxPort."
SYNTAX Integer32 (0..32767)
FcphVersion ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents the version of FC-PH supported by an
NxPort or FxPort."
SYNTAX Integer32 (0..255)
FcStackedConnMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents an enumerated value used to indicate
the Class 1 Stacked Connect Mode supported by
an NxPort or FxPort."
SYNTAX INTEGER {
none(1),
transparent(2),
lockedDown(3) }
FcCosCap ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents the class of service capability of an
NxPort or FxPort."
SYNTAX BITS {
classF(0),
class1(1),
class2(2),
class3(3),
class4(4),
class5(5),
class6(6) }
FcFeModuleCapacity ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents the maximum number of modules within
a Fabric Element."
SYNTAX Unsigned32
FcFeFxPortCapacity ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents the maximum number of FxPorts within
a module."
SYNTAX Unsigned32
FcFeModuleIndex ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents the module index within a conceptual table."
SYNTAX Unsigned32
FcFeFxPortIndex ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents the FxPort index within a conceptual table."
SYNTAX Unsigned32
FcFeNxPortIndex ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents the NxPort index within a conceptual table."
SYNTAX Integer32 (1..126)
FcBbCreditModel ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents the BB_Credit model of an FxPort."
SYNTAX INTEGER {
regular(1),
alternate(2) }
fcFeMIBObjects OBJECT IDENTIFIER
-- 1.3.6.1.2.1.75.1 -- ::= { fcFeMIB 1 }
-- Note:
-- fcFeMIBConformance OBJECT IDENTIFIER ::= { fcFeMIB 2 }
-- see at the end of the module
-- Groups under fcFeMIBObjects
fcFeConfig OBJECT IDENTIFIER
-- 1.3.6.1.2.1.75.1.1 -- ::= { fcFeMIBObjects 1 }
fcFeStatus OBJECT IDENTIFIER
-- 1.3.6.1.2.1.75.1.2 -- ::= { fcFeMIBObjects 2 }
fcFeError OBJECT IDENTIFIER
-- 1.3.6.1.2.1.75.1.3 -- ::= { fcFeMIBObjects 3 }
fcFeAccounting OBJECT IDENTIFIER
-- 1.3.6.1.2.1.75.1.4 -- ::= { fcFeMIBObjects 4 }
fcFeCapabilities OBJECT IDENTIFIER
-- 1.3.6.1.2.1.75.1.5 -- ::= { fcFeMIBObjects 5 }
-- The Configuration group
-- This group consists of scalar objects and tables.
-- It contains the configuration and service parameters
-- of the Fabric Element and the FxPorts.
-- The group represents a set of parameters associated with
-- the Fabric Element or an FxPort to support its NxPorts.
fcFeFabricName OBJECT-TYPE
SYNTAX FcNameId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Name_Identifier of the Fabric to which this Fabric
Element belongs."
-- 1.3.6.1.2.1.75.1.1.1 -- ::= { fcFeConfig 1 }
fcFeElementName OBJECT-TYPE
SYNTAX FcNameId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Name_Identifier of the Fabric Element."
-- 1.3.6.1.2.1.75.1.1.2 -- ::= { fcFeConfig 2 }
fcFeModuleCapacity OBJECT-TYPE
SYNTAX FcFeModuleCapacity
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of modules in the Fabric Element,
regardless of their current state."
-- 1.3.6.1.2.1.75.1.1.3 -- ::= { fcFeConfig 3 }
-- The Module Table.
-- This table contains one entry for each module,
-- information of the modules.
fcFeModuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF FcFeModuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains, one entry for each module in the
Fabric Element, information of the modules."
-- 1.3.6.1.2.1.75.1.1.4 -- ::= { fcFeConfig 4 }
fcFeModuleEntry OBJECT-TYPE
SYNTAX FcFeModuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing the configuration parameters of a
module."
INDEX {
fcFeModuleIndex }
-- 1.3.6.1.2.1.75.1.1.4.1 -- ::= { fcFeModuleTable 1 }
FcFeModuleEntry ::= SEQUENCE {
fcFeModuleIndex FcFeModuleIndex,
fcFeModuleDescr SnmpAdminString,
fcFeModuleObjectID OBJECT IDENTIFIER,
fcFeModuleOperStatus INTEGER,
fcFeModuleLastChange TimeStamp,
fcFeModuleFxPortCapacity FcFeFxPortCapacity,
fcFeModuleName FcNameId }
fcFeModuleIndex OBJECT-TYPE
SYNTAX FcFeModuleIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifies the module within the Fabric Element
for which this entry contains information. This value is
never greater than fcFeModuleCapacity."
-- 1.3.6.1.2.1.75.1.1.4.1.1 -- ::= { fcFeModuleEntry 1 }
fcFeModuleDescr OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A textual description of the module. This value should
include the full name and version identification of the
module."
-- 1.3.6.1.2.1.75.1.1.4.1.2 -- ::= { fcFeModuleEntry 2 }
fcFeModuleObjectID OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vendor's authoritative identification of the module.
This value may be allocated within the SMI enterprises
subtree (1.3.6.1.4.1) and provides a straight-forward and
unambiguous means for determining what kind of module is
being managed.
For example, this object could take the value
1.3.6.1.4.1.99649.3.9 if vendor 'Neufe Inc.' was assigned
the subtree 1.3.6.1.4.1.99649, and had assigned the
identifier 1.3.6.1.4.1.99649.3.9 to its 'FeFiFo-16
PlugInCard.'"
-- 1.3.6.1.2.1.75.1.1.4.1.3 -- ::= { fcFeModuleEntry 3 }
fcFeModuleOperStatus OBJECT-TYPE
SYNTAX INTEGER {
online(1), -- functional
offline(2), -- not available
testing(3), -- under testing
faulty(4) -- defective
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the operational status of the module:
online(1) the module is functioning properly;
offline(2) the module is not available;
testing(3) the module is under testing; and
faulty(4) the module is defective in some way."
-- 1.3.6.1.2.1.75.1.1.4.1.4 -- ::= { fcFeModuleEntry 4 }
fcFeModuleLastChange OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the value of sysUpTime when the module
entered its current operational status. A value of zero
indicates that the operational status of the module has not
changed since the agent last restarted."
-- 1.3.6.1.2.1.75.1.1.4.1.5 -- ::= { fcFeModuleEntry 5 }
fcFeModuleFxPortCapacity OBJECT-TYPE
SYNTAX FcFeFxPortCapacity
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of FxPort that can be contained within the
module. Within each module, the ports are uniquely numbered
in the range from 1 to fcFeModuleFxPortCapacity inclusive.
However, the numbers are not required to be contiguous."
-- 1.3.6.1.2.1.75.1.1.4.1.6 -- ::= { fcFeModuleEntry 6 }
fcFeModuleName OBJECT-TYPE
SYNTAX FcNameId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Name_Identifier of the module."
-- 1.3.6.1.2.1.75.1.1.4.1.7 -- ::= { fcFeModuleEntry 7 }
-- the FxPort Configuration Table.
-- This table contains, one entry for each FxPort,
-- configuration parameters of the ports.
fcFxPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF FcFxPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains, one entry for each FxPort in the
Fabric Element, configuration and service parameters of the
FxPorts."
-- 1.3.6.1.2.1.75.1.1.5 -- ::= { fcFeConfig 5 }
fcFxPortEntry OBJECT-TYPE
SYNTAX FcFxPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing the configuration and service parameters
of a FxPort."
INDEX {
fcFeModuleIndex,
fcFxPortIndex }
-- 1.3.6.1.2.1.75.1.1.5.1 -- ::= { fcFxPortTable 1 }
FcFxPortEntry ::= SEQUENCE {
fcFxPortIndex FcFeFxPortIndex,
fcFxPortName FcNameId,
fcFxPortFcphVersionHigh FcphVersion,
fcFxPortFcphVersionLow FcphVersion,
fcFxPortBbCredit FcBbCredit,
fcFxPortRxBufSize FcRxDataFieldSize,
fcFxPortRatov MilliSeconds,
fcFxPortEdtov MilliSeconds,
fcFxPortCosSupported FcCosCap,
fcFxPortIntermixSupported TruthValue,
fcFxPortStackedConnMode FcStackedConnMode,
fcFxPortClass2SeqDeliv TruthValue,
fcFxPortClass3SeqDeliv TruthValue,
fcFxPortHoldTime MicroSeconds }
fcFxPortIndex OBJECT-TYPE
SYNTAX FcFeFxPortIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifies the FxPort within the module. This
number ranges from 1 to the value of fcFeModulePortCapacity
for the associated module. The value remains constant for
the identified FxPort until the module is re-initialized."
-- 1.3.6.1.2.1.75.1.1.5.1.1 -- ::= { fcFxPortEntry 1 }
fcFxPortName OBJECT-TYPE
SYNTAX FcNameId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The World_wide Name of this FxPort. Each FxPort has a
unique Port World_wide Name within the Fabric."
-- 1.3.6.1.2.1.75.1.1.5.1.2 -- ::= { fcFxPortEntry 2 }
-- FxPort common service parameters
fcFxPortFcphVersionHigh OBJECT-TYPE
SYNTAX FcphVersion
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The highest or most recent version of FC-PH that the FxPort
is configured to support."
-- 1.3.6.1.2.1.75.1.1.5.1.3 -- ::= { fcFxPortEntry 3 }
fcFxPortFcphVersionLow OBJECT-TYPE
SYNTAX FcphVersion
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The lowest or earliest version of FC-PH that the FxPort is
configured to support."
-- 1.3.6.1.2.1.75.1.1.5.1.4 -- ::= { fcFxPortEntry 4 }
fcFxPortBbCredit OBJECT-TYPE
SYNTAX FcBbCredit
UNITS
"buffers"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of receive buffers available for holding
Class 1 connect-request, Class 2 or 3 frames from the
attached NxPort. It is for buffer-to-buffer flow control
in the direction from the attached NxPort (if applicable)
to FxPort."
-- 1.3.6.1.2.1.75.1.1.5.1.5 -- ::= { fcFxPortEntry 5 }
fcFxPortRxBufSize OBJECT-TYPE
SYNTAX FcRxDataFieldSize
UNITS
"bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The largest Data_Field Size (in octets) for an FT_1 frame
that can be received by the FxPort."
-- 1.3.6.1.2.1.75.1.1.5.1.6 -- ::= { fcFxPortEntry 6 }
fcFxPortRatov OBJECT-TYPE
SYNTAX MilliSeconds
UNITS
"milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Resource_Allocation_Timeout Value configured for the
FxPort. This is used as the timeout value for determining
when to reuse an NxPort resource such as a
Recovery_Qualifier. It represents E_D_TOV (see next
object) plus twice the maximum time that a frame may be
delayed within the Fabric and still be delivered."
-- 1.3.6.1.2.1.75.1.1.5.1.7 -- ::= { fcFxPortEntry 7 }
fcFxPortEdtov OBJECT-TYPE
SYNTAX MilliSeconds
UNITS
"milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The E_D_TOV value configured for the FxPort. The
Error_Detect_Timeout Value is used as the timeout value for
detecting an error condition."
-- 1.3.6.1.2.1.75.1.1.5.1.8 -- ::= { fcFxPortEntry 8 }
-- FxPort class service parameters
fcFxPortCosSupported OBJECT-TYPE
SYNTAX FcCosCap
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A value indicating the set of Classes of Service supported
by the FxPort."
-- 1.3.6.1.2.1.75.1.1.5.1.9 -- ::= { fcFxPortEntry 9 }
fcFxPortIntermixSupported OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A flag indicating whether or not the FxPort supports an
Intermixed Dedicated Connection."
-- 1.3.6.1.2.1.75.1.1.5.1.10 -- ::= { fcFxPortEntry 10 }
fcFxPortStackedConnMode OBJECT-TYPE
SYNTAX FcStackedConnMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A value indicating the mode of Stacked Connect supported by
the FxPort."
-- 1.3.6.1.2.1.75.1.1.5.1.11 -- ::= { fcFxPortEntry 11 }
fcFxPortClass2SeqDeliv OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A flag indicating whether or not Class 2 Sequential
Delivery is supported by the FxPort."
-- 1.3.6.1.2.1.75.1.1.5.1.12 -- ::= { fcFxPortEntry 12 }
fcFxPortClass3SeqDeliv OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A flag indicating whether or not Class 3 Sequential
Delivery is supported by the FxPort."
-- 1.3.6.1.2.1.75.1.1.5.1.13 -- ::= { fcFxPortEntry 13 }
-- other FxPort parameters
fcFxPortHoldTime OBJECT-TYPE
SYNTAX MicroSeconds
UNITS
"microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum time (in microseconds) that the FxPort shall
hold a frame before discarding the frame if it is unable to
deliver the frame. The value 0 means that the FxPort does
not support this parameter."
-- 1.3.6.1.2.1.75.1.1.5.1.14 -- ::= { fcFxPortEntry 14 }
-- the Status group
-- This group consists of tables that contains operational
-- status and established service parameters for the Fabric
-- Element and the attached NxPorts.
-- The FxPort Status table
-- This table contains, one entry for each FxPort,
-- the operational status and parameters of the FxPorts.
fcFxPortStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF FcFxPortStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains, one entry for each FxPort in the
Fabric Element, operational status and parameters of the
FxPorts."
-- 1.3.6.1.2.1.75.1.2.1 -- ::= { fcFeStatus 1 }
fcFxPortStatusEntry OBJECT-TYPE
SYNTAX FcFxPortStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing operational status and parameters of a
FxPort."
AUGMENTS {
fcFxPortEntry }
-- 1.3.6.1.2.1.75.1.2.1.1 -- ::= { fcFxPortStatusTable 1 }
FcFxPortStatusEntry ::= SEQUENCE {
fcFxPortID FcAddressId,
fcFxPortBbCreditAvailable Gauge32,
fcFxPortOperMode INTEGER,
fcFxPortAdminMode INTEGER }
fcFxPortID OBJECT-TYPE
SYNTAX FcAddressId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address identifier by which this FxPort is identified
within the Fabric. The FxPort may assign its address
identifier to its attached NxPort(s) during Fabric Login."
-- 1.3.6.1.2.1.75.1.2.1.1.1 -- ::= { fcFxPortStatusEntry 1 }
fcFxPortBbCreditAvailable OBJECT-TYPE
SYNTAX Gauge32
UNITS
"buffers"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of buffers currently available for receiving
frames from the attached port in the buffer-to-buffer flow
control. The value should be less than or equal to
fcFxPortBbCredit."
-- 1.3.6.1.2.1.75.1.2.1.1.2 -- ::= { fcFxPortStatusEntry 2 }
fcFxPortOperMode OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
fPort(2),
flPort(3) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operational mode of the FxPort."
-- 1.3.6.1.2.1.75.1.2.1.1.3 -- ::= { fcFxPortStatusEntry 3 }
fcFxPortAdminMode OBJECT-TYPE
SYNTAX INTEGER {
fPort(2),
flPort(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The desired operational mode of the FxPort."
-- 1.3.6.1.2.1.75.1.2.1.1.4 -- ::= { fcFxPortStatusEntry 4 }
-- the FxPort Physical Level table
-- This table contains, one entry for each FxPort in the
-- Fabric Element, the physical level status and parameters
-- of the FxPorts.
fcFxPortPhysTable OBJECT-TYPE
SYNTAX SEQUENCE OF FcFxPortPhysEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains, one entry for each FxPort in the
Fabric Element, physical level status and parameters of the
FxPorts."
-- 1.3.6.1.2.1.75.1.2.2 -- ::= { fcFeStatus 2 }
fcFxPortPhysEntry OBJECT-TYPE
SYNTAX FcFxPortPhysEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing physical level status and parameters of
a FxPort."
AUGMENTS {
fcFxPortEntry }
-- 1.3.6.1.2.1.75.1.2.2.1 -- ::= { fcFxPortPhysTable 1 }
FcFxPortPhysEntry ::= SEQUENCE {
fcFxPortPhysAdminStatus INTEGER,
fcFxPortPhysOperStatus INTEGER,
fcFxPortPhysLastChange TimeStamp,
fcFxPortPhysRttov MilliSeconds }
fcFxPortPhysAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
online(1), -- place port online
offline(2), -- take port offline
testing(3) -- initiate test procedures
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The desired state of the FxPort. A management station may
place the FxPort in a desired state by setting this object
accordingly. The testing(3) state indicates that no
operational frames can be passed. When a Fabric Element
initializes, all FxPorts start with fcFxPortPhysAdminStatus
in the offline(2) state. As the result of either explicit
management action or per configuration information
accessible by the Fabric Element, fcFxPortPhysAdminStatus
is then changed to either the online(1) or testing(3)
states, or remains in the offline state."
-- 1.3.6.1.2.1.75.1.2.2.1.1 -- ::= { fcFxPortPhysEntry 1 }
fcFxPortPhysOperStatus OBJECT-TYPE
SYNTAX INTEGER {
online(1), -- Login may proceed
offline(2), -- Login cannot proceed
testing(3), -- port is under test
linkFailure(4) -- failure after online/testing
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operational status of the FxPort. The
testing(3) indicates that no operational frames can be
passed. If fcFxPortPhysAdminStatus is offline(2) then
fcFxPortPhysOperStatus should be offline(2). If
fcFxPortPhysAdminStatus is changed to online(1) then
fcFxPortPhysOperStatus should change to online(1) if the
FxPort is ready to accept Fabric Login request from the
attached NxPort; it should proceed and remain in the link-
failure(4) state if and only if there is a fault that
prevents it from going to the online(1) state."
-- 1.3.6.1.2.1.75.1.2.2.1.2 -- ::= { fcFxPortPhysEntry 2 }
fcFxPortPhysLastChange OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime at the time the FxPort entered its
current operational status. A value of zero indicates that
the FxPort's operational status has not changed since the
agent last restarted."
-- 1.3.6.1.2.1.75.1.2.2.1.3 -- ::= { fcFxPortPhysEntry 3 }
fcFxPortPhysRttov OBJECT-TYPE
SYNTAX MilliSeconds
UNITS
"milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Receiver_Transmitter_Timeout value of the FxPort. This
is used by the receiver logic to detect Loss of
Synchronization."
-- 1.3.6.1.2.1.75.1.2.2.1.4 -- ::= { fcFxPortPhysEntry 4 }
-- The FxPort Fabric Login table
--
-- This table contains, one entry for each FxPort in the
-- Fabric Element, the Service Parameters that have been
-- established from the most recent Fabric Login,
-- implicit or explicit.
fcFxLoginTable OBJECT-TYPE
SYNTAX SEQUENCE OF FcFxLoginEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains, one entry for each NxPort attached
to a particular FxPort in the Fabric Element, services
parameters established from the most recent Fabric Login,
explicit or implicit. Note that an FxPort may have one or
more NxPort attached to it."
-- 1.3.6.1.2.1.75.1.2.3 -- ::= { fcFeStatus 3 }
fcFxLoginEntry OBJECT-TYPE
SYNTAX FcFxLoginEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing service parameters established from a
successful Fabric Login."
INDEX {
fcFeModuleIndex,
fcFxPortIndex,
fcFxPortNxLoginIndex }
-- 1.3.6.1.2.1.75.1.2.3.1 -- ::= { fcFxLoginTable 1 }
FcFxLoginEntry ::= SEQUENCE {
fcFxPortNxLoginIndex FcFeNxPortIndex,
fcFxPortFcphVersionAgreed FcphVersion,
fcFxPortNxPortBbCredit FcBbCredit,
fcFxPortNxPortRxDataFieldSize FcRxDataFieldSize,
fcFxPortCosSuppAgreed FcCosCap,
fcFxPortIntermixSuppAgreed TruthValue,
fcFxPortStackedConnModeAgreed FcStackedConnMode,
fcFxPortClass2SeqDelivAgreed TruthValue,
fcFxPortClass3SeqDelivAgreed TruthValue,
fcFxPortNxPortName FcNameId,
fcFxPortConnectedNxPort FcAddressId,
fcFxPortBbCreditModel FcBbCreditModel }
fcFxPortNxLoginIndex OBJECT-TYPE
SYNTAX FcFeNxPortIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The object identifies the associated NxPort in the
attachment for which the entry contains information."
-- 1.3.6.1.2.1.75.1.2.3.1.1 -- ::= { fcFxLoginEntry 1 }
fcFxPortFcphVersionAgreed OBJECT-TYPE
SYNTAX FcphVersion
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The version of FC-PH that the FxPort has agreed to support
from the Fabric Login"
-- 1.3.6.1.2.1.75.1.2.3.1.2 -- ::= { fcFxLoginEntry 2 }
fcFxPortNxPortBbCredit OBJECT-TYPE
SYNTAX FcBbCredit
UNITS
"buffers"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of buffers available for holding Class 1
connect-request, Class 2 or Class 3 frames to be
transmitted to the attached NxPort. It is for buffer-to-
buffer flow control in the direction from FxPort to NxPort.
The buffer-to-buffer flow control mechanism is indicated in
the respective fcFxPortBbCreditModel."
-- 1.3.6.1.2.1.75.1.2.3.1.3 -- ::= { fcFxLoginEntry 3 }
fcFxPortNxPortRxDataFieldSize OBJECT-TYPE
SYNTAX FcRxDataFieldSize
UNITS
"bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Receive Data Field Size of the attached NxPort. This
object specifies the largest Data Field Size for an FT_1
frame that can be received by the NxPort."
-- 1.3.6.1.2.1.75.1.2.3.1.4 -- ::= { fcFxLoginEntry 4 }
fcFxPortCosSuppAgreed OBJECT-TYPE
SYNTAX FcCosCap
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A variable indicating that the attached NxPort has
requested the FxPort for the support of classes of services
and the FxPort has granted the request."
-- 1.3.6.1.2.1.75.1.2.3.1.5 -- ::= { fcFxLoginEntry 5 }
fcFxPortIntermixSuppAgreed OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A variable indicating that the attached NxPort has
requested the FxPort for the support of Intermix and the
FxPort has granted the request. This flag is only valid if
Class 1 service is supported."
-- 1.3.6.1.2.1.75.1.2.3.1.6 -- ::= { fcFxLoginEntry 6 }
fcFxPortStackedConnModeAgreed OBJECT-TYPE
SYNTAX FcStackedConnMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A variable indicating whether the FxPort has agreed to
support stacked connect from the Fabric Login. This is only
meaningful if Class 1 service has been agreed."
-- 1.3.6.1.2.1.75.1.2.3.1.7 -- ::= { fcFxLoginEntry 7 }
fcFxPortClass2SeqDelivAgreed OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A variable indicating whether the FxPort has agreed to
support Class 2 sequential delivery from the Fabric Login.
This is only meaningful if Class 2 service has been
agreed."
-- 1.3.6.1.2.1.75.1.2.3.1.8 -- ::= { fcFxLoginEntry 8 }
fcFxPortClass3SeqDelivAgreed OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A flag indicating whether the FxPort has agreed to support
Class 3 sequential delivery from the Fabric Login. This is
only meaningful if Class 3 service has been agreed."
-- 1.3.6.1.2.1.75.1.2.3.1.9 -- ::= { fcFxLoginEntry 9 }
fcFxPortNxPortName OBJECT-TYPE
SYNTAX FcNameId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port name of the attached NxPort."
-- 1.3.6.1.2.1.75.1.2.3.1.10 -- ::= { fcFxLoginEntry 10 }
fcFxPortConnectedNxPort OBJECT-TYPE
SYNTAX FcAddressId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address identifier of the destination NxPort with which
this FxPort is currently engaged in a either a Class 1 or
loop connection. If this FxPort is not engaged in a
connection, then the value of this object is '000000'H."
-- 1.3.6.1.2.1.75.1.2.3.1.11 -- ::= { fcFxLoginEntry 11 }
fcFxPortBbCreditModel OBJECT-TYPE
SYNTAX FcBbCreditModel
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the BB_Credit model used by the
FxPort."
-- 1.3.6.1.2.1.75.1.2.3.1.12 -- ::= { fcFxLoginEntry 12 }
-- the Error group
-- This group consists of tables that contain information about
-- the various types of errors detected. The management station
-- may use the information in this group to determine the
-- quality of the link between the FxPort and its attached NxPort.
-- the FxPort Error table
-- This table contains, one entry for each FxPort in the Fabric
-- Element, counters recording numbers of errors detected
-- since the management agent re-initialized.
-- The first 6 columnar objects after the port index corresponds
-- to the counters in the Link Error Status Block.
fcFxPortErrorTable OBJECT-TYPE
SYNTAX SEQUENCE OF FcFxPortErrorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains, one entry for each FxPort, counters
that record the numbers of errors detected."
-- 1.3.6.1.2.1.75.1.3.1 -- ::= { fcFeError 1 }
fcFxPortErrorEntry OBJECT-TYPE
SYNTAX FcFxPortErrorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing error counters of a FxPort."
AUGMENTS {
fcFxPortEntry }
-- 1.3.6.1.2.1.75.1.3.1.1 -- ::= { fcFxPortErrorTable 1 }
FcFxPortErrorEntry ::= SEQUENCE {
fcFxPortLinkFailures Counter32,
fcFxPortSyncLosses Counter32,
fcFxPortSigLosses Counter32,
fcFxPortPrimSeqProtoErrors Counter32,
fcFxPortInvalidTxWords Counter32,
fcFxPortInvalidCrcs Counter32,
fcFxPortDelimiterErrors Counter32,
fcFxPortAddressIdErrors Counter32,
fcFxPortLinkResetIns Counter32,
fcFxPortLinkResetOuts Counter32,
fcFxPortOlsIns Counter32,
fcFxPortOlsOuts Counter32 }
fcFxPortLinkFailures OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of link failures detected by this FxPort."
-- 1.3.6.1.2.1.75.1.3.1.1.1 -- ::= { fcFxPortErrorEntry 1 }
fcFxPortSyncLosses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of loss of synchronization detected by the
FxPort."
-- 1.3.6.1.2.1.75.1.3.1.1.2 -- ::= { fcFxPortErrorEntry 2 }
fcFxPortSigLosses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of loss of signal detected by the FxPort."
-- 1.3.6.1.2.1.75.1.3.1.1.3 -- ::= { fcFxPortErrorEntry 3 }
fcFxPortPrimSeqProtoErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of primitive sequence protocol errors detected
by the FxPort."
-- 1.3.6.1.2.1.75.1.3.1.1.4 -- ::= { fcFxPortErrorEntry 4 }
fcFxPortInvalidTxWords OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of invalid transmission word detected by the
FxPort."
-- 1.3.6.1.2.1.75.1.3.1.1.5 -- ::= { fcFxPortErrorEntry 5 }
fcFxPortInvalidCrcs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of invalid CRC detected by this FxPort."
-- 1.3.6.1.2.1.75.1.3.1.1.6 -- ::= { fcFxPortErrorEntry 6 }
fcFxPortDelimiterErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Delimiter Errors detected by this FxPort."
-- 1.3.6.1.2.1.75.1.3.1.1.7 -- ::= { fcFxPortErrorEntry 7 }
fcFxPortAddressIdErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of address identifier errors detected by this
FxPort."
-- 1.3.6.1.2.1.75.1.3.1.1.8 -- ::= { fcFxPortErrorEntry 8 }
fcFxPortLinkResetIns OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Link Reset Protocol received by this FxPort
from the attached NxPort."
-- 1.3.6.1.2.1.75.1.3.1.1.9 -- ::= { fcFxPortErrorEntry 9 }
fcFxPortLinkResetOuts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Link Reset Protocol issued by this FxPort to
the attached NxPort."
-- 1.3.6.1.2.1.75.1.3.1.1.10 -- ::= { fcFxPortErrorEntry 10 }
fcFxPortOlsIns OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Offline Sequence received by this FxPort."
-- 1.3.6.1.2.1.75.1.3.1.1.11 -- ::= { fcFxPortErrorEntry 11 }
fcFxPortOlsOuts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Offline Sequence issued by this FxPort."
-- 1.3.6.1.2.1.75.1.3.1.1.12 -- ::= { fcFxPortErrorEntry 12 }
-- Accounting Groups:
-- (1) Class 1 Accounting Group,
-- (2) Class 2 Accounting Group, and
-- (3) Class 3 Accounting Group.
-- Each group consists of a table that contains accounting
-- information for the FxPorts in the Fabric Element.
-- the Class 1 Accounting table
-- This table contains, one entry for each FxPort in the Fabric
-- Element, Counter32s for certain types of events occurred in the
-- the FxPorts since the the management agent has re-initialized.
fcFxPortC1AccountingTable OBJECT-TYPE
SYNTAX SEQUENCE OF FcFxPortC1AccountingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains, one entry for each FxPort in the
Fabric Element, Class 1 accounting information recorded
since the management agent has re-initialized."
-- 1.3.6.1.2.1.75.1.4.1 -- ::= { fcFeAccounting 1 }
fcFxPortC1AccountingEntry OBJECT-TYPE
SYNTAX FcFxPortC1AccountingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing Class 1 accounting information for each
FxPort."
AUGMENTS {
fcFxPortEntry }
-- 1.3.6.1.2.1.75.1.4.1.1 -- ::= { fcFxPortC1AccountingTable 1 }
FcFxPortC1AccountingEntry ::= SEQUENCE {
fcFxPortC1InFrames Counter32,
fcFxPortC1OutFrames Counter32,
fcFxPortC1InOctets Counter32,
fcFxPortC1OutOctets Counter32,
fcFxPortC1Discards Counter32,
fcFxPortC1FbsyFrames Counter32,
fcFxPortC1FrjtFrames Counter32,
fcFxPortC1InConnections Counter32,
fcFxPortC1OutConnections Counter32,
fcFxPortC1ConnTime MilliSeconds }
fcFxPortC1InFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Class 1 frames (other than Class 1 connect-
request) received by this FxPort from its attached NxPort."
-- 1.3.6.1.2.1.75.1.4.1.1.1 -- ::= { fcFxPortC1AccountingEntry 1 }
fcFxPortC1OutFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Class 1 frames (other than Class 1 connect-
request) delivered through this FxPort to its attached
NxPort."
-- 1.3.6.1.2.1.75.1.4.1.1.2 -- ::= { fcFxPortC1AccountingEntry 2 }
fcFxPortC1InOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Class 1 frame octets, including the frame
delimiters, received by this FxPort from its attached
NxPort."
-- 1.3.6.1.2.1.75.1.4.1.1.3 -- ::= { fcFxPortC1AccountingEntry 3 }
fcFxPortC1OutOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Class 1 frame octets, including the frame
delimiters, delivered through this FxPort its attached
NxPort."
-- 1.3.6.1.2.1.75.1.4.1.1.4 -- ::= { fcFxPortC1AccountingEntry 4 }
fcFxPortC1Discards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Class 1 frames discarded by this FxPort."
-- 1.3.6.1.2.1.75.1.4.1.1.5 -- ::= { fcFxPortC1AccountingEntry 5 }
fcFxPortC1FbsyFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of F_BSY frames generated by this FxPort against
Class 1 connect-request."
-- 1.3.6.1.2.1.75.1.4.1.1.6 -- ::= { fcFxPortC1AccountingEntry 6 }
fcFxPortC1FrjtFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of F_RJT frames generated by this FxPort against
Class 1 connect-request."
-- 1.3.6.1.2.1.75.1.4.1.1.7 -- ::= { fcFxPortC1AccountingEntry 7 }
fcFxPortC1InConnections OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Class 1 connections successfully established
in which the attached NxPort is the source of the connect-
request."
-- 1.3.6.1.2.1.75.1.4.1.1.8 -- ::= { fcFxPortC1AccountingEntry 8 }
fcFxPortC1OutConnections OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Class 1 connections successfully established
in which the attached NxPort is the destination of the
connect-request."
-- 1.3.6.1.2.1.75.1.4.1.1.9 -- ::= { fcFxPortC1AccountingEntry 9 }
fcFxPortC1ConnTime OBJECT-TYPE
SYNTAX MilliSeconds
UNITS
"milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The cumulative time that this FxPort has been engaged in
Class 1 connection. The amount of time is counted from
after a connect-request has been accepted until the
connection is disengaged, either by an EOFdt or Link
Reset."
-- 1.3.6.1.2.1.75.1.4.1.1.10 -- ::= { fcFxPortC1AccountingEntry 10 }
-- the Class 2 Accounting table
-- This table contains, one entry for each FxPort in the Fabric
-- Element, Counter32s for certain types of events occurred in the
-- the FxPorts since the the management agent has re-initialized.
fcFxPortC2AccountingTable OBJECT-TYPE
SYNTAX SEQUENCE OF FcFxPortC2AccountingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains, one entry for each FxPort in the
Fabric Element, Class 2 accounting information recorded
since the management agent has re-initialized."
-- 1.3.6.1.2.1.75.1.4.2 -- ::= { fcFeAccounting 2 }
fcFxPortC2AccountingEntry OBJECT-TYPE
SYNTAX FcFxPortC2AccountingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing Class 2 accounting information for each
FxPort."
AUGMENTS {
fcFxPortEntry }
-- 1.3.6.1.2.1.75.1.4.2.1 -- ::= { fcFxPortC2AccountingTable 1 }
FcFxPortC2AccountingEntry ::= SEQUENCE {
fcFxPortC2InFrames Counter32,
fcFxPortC2OutFrames Counter32,
fcFxPortC2InOctets Counter32,
fcFxPortC2OutOctets Counter32,
fcFxPortC2Discards Counter32,
fcFxPortC2FbsyFrames Counter32,
fcFxPortC2FrjtFrames Counter32 }
fcFxPortC2InFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Class 2 frames received by this FxPort from
its attached NxPort."
-- 1.3.6.1.2.1.75.1.4.2.1.1 -- ::= { fcFxPortC2AccountingEntry 1 }
fcFxPortC2OutFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Class 2 frames delivered through this FxPort
to its attached NxPort."
-- 1.3.6.1.2.1.75.1.4.2.1.2 -- ::= { fcFxPortC2AccountingEntry 2 }
fcFxPortC2InOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Class 2 frame octets, including the frame
delimiters, received by this FxPort from its attached
NxPort."
-- 1.3.6.1.2.1.75.1.4.2.1.3 -- ::= { fcFxPortC2AccountingEntry 3 }
fcFxPortC2OutOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Class 2 frame octets, including the frame
delimiters, delivered through this FxPort to its attached
NxPort."
-- 1.3.6.1.2.1.75.1.4.2.1.4 -- ::= { fcFxPortC2AccountingEntry 4 }
fcFxPortC2Discards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Class 2 frames discarded by this FxPort."
-- 1.3.6.1.2.1.75.1.4.2.1.5 -- ::= { fcFxPortC2AccountingEntry 5 }
fcFxPortC2FbsyFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of F_BSY frames generated by this FxPort against
Class 2 frames."
-- 1.3.6.1.2.1.75.1.4.2.1.6 -- ::= { fcFxPortC2AccountingEntry 6 }
fcFxPortC2FrjtFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of F_RJT frames generated by this FxPort against
Class 2 frames."
-- 1.3.6.1.2.1.75.1.4.2.1.7 -- ::= { fcFxPortC2AccountingEntry 7 }
-- the Class 3 Accounting Group
-- This table contains, one entry for each FxPort in the Fabric
-- Element, Counter32s for certain types of events occurred in the
-- the FxPorts since the management agent has re-initialized.
fcFxPortC3AccountingTable OBJECT-TYPE
SYNTAX SEQUENCE OF FcFxPortC3AccountingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains, one entry for each FxPort in the
Fabric Element, Class 3 accounting information recorded
since the management agent has re-initialized."
-- 1.3.6.1.2.1.75.1.4.3 -- ::= { fcFeAccounting 3 }
fcFxPortC3AccountingEntry OBJECT-TYPE
SYNTAX FcFxPortC3AccountingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing Class 3 accounting information for each
FxPort."
AUGMENTS {
fcFxPortEntry }
-- 1.3.6.1.2.1.75.1.4.3.1 -- ::= { fcFxPortC3AccountingTable 1 }
FcFxPortC3AccountingEntry ::= SEQUENCE {
fcFxPortC3InFrames Counter32,
fcFxPortC3OutFrames Counter32,
fcFxPortC3InOctets Counter32,
fcFxPortC3OutOctets Counter32,
fcFxPortC3Discards Counter32 }
fcFxPortC3InFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Class 3 frames received by this FxPort from
its attached NxPort."
-- 1.3.6.1.2.1.75.1.4.3.1.1 -- ::= { fcFxPortC3AccountingEntry 1 }
fcFxPortC3OutFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Class 3 frames delivered through this FxPort
to its attached NxPort."
-- 1.3.6.1.2.1.75.1.4.3.1.2 -- ::= { fcFxPortC3AccountingEntry 2 }
fcFxPortC3InOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Class 3 frame octets, including the frame
delimiters, received by this FxPort from its attached
NxPort."
-- 1.3.6.1.2.1.75.1.4.3.1.3 -- ::= { fcFxPortC3AccountingEntry 3 }
fcFxPortC3OutOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Class 3 frame octets, including the frame
delimiters, delivered through this FxPort to its attached
NxPort."
-- 1.3.6.1.2.1.75.1.4.3.1.4 -- ::= { fcFxPortC3AccountingEntry 4 }
fcFxPortC3Discards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Class 3 frames discarded by this FxPort."
-- 1.3.6.1.2.1.75.1.4.3.1.5 -- ::= { fcFxPortC3AccountingEntry 5 }
-- The Capability Group - consists of a table describing
-- information about what each FxPort is inherently capable
-- of operating or supporting.
-- A capability may be used, as expressed in its respective
-- object value in the Configuration group.
fcFxPortCapTable OBJECT-TYPE
SYNTAX SEQUENCE OF FcFxPortCapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains, one entry for each FxPort, the
capabilities of the port within the Fabric Element."
-- 1.3.6.1.2.1.75.1.5.1 -- ::= { fcFeCapabilities 1 }
fcFxPortCapEntry OBJECT-TYPE
SYNTAX FcFxPortCapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing the Cap of a FxPort."
AUGMENTS {
fcFxPortEntry }
-- 1.3.6.1.2.1.75.1.5.1.1 -- ::= { fcFxPortCapTable 1 }
FcFxPortCapEntry ::= SEQUENCE {
fcFxPortCapFcphVersionHigh FcphVersion,
fcFxPortCapFcphVersionLow FcphVersion,
fcFxPortCapBbCreditMax FcBbCredit,
fcFxPortCapBbCreditMin FcBbCredit,
fcFxPortCapRxDataFieldSizeMax FcRxDataFieldSize,
fcFxPortCapRxDataFieldSizeMin FcRxDataFieldSize,
fcFxPortCapCos FcCosCap,
fcFxPortCapIntermix TruthValue,
fcFxPortCapStackedConnMode FcStackedConnMode,
fcFxPortCapClass2SeqDeliv TruthValue,
fcFxPortCapClass3SeqDeliv TruthValue,
fcFxPortCapHoldTimeMax MicroSeconds,
fcFxPortCapHoldTimeMin MicroSeconds }
fcFxPortCapFcphVersionHigh OBJECT-TYPE
SYNTAX FcphVersion
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The highest or most recent version of FC-PH that the FxPort
is capable of supporting."
-- 1.3.6.1.2.1.75.1.5.1.1.1 -- ::= { fcFxPortCapEntry 1 }
fcFxPortCapFcphVersionLow OBJECT-TYPE
SYNTAX FcphVersion
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The lowest or earliest version of FC-PH that the FxPort is
capable of supporting."
-- 1.3.6.1.2.1.75.1.5.1.1.2 -- ::= { fcFxPortCapEntry 2 }
fcFxPortCapBbCreditMax OBJECT-TYPE
SYNTAX FcBbCredit
UNITS
"buffers"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of receive buffers available for holding
Class 1 connect-request, Class 2 or Class 3 frames from the
attached NxPort."
-- 1.3.6.1.2.1.75.1.5.1.1.3 -- ::= { fcFxPortCapEntry 3 }
fcFxPortCapBbCreditMin OBJECT-TYPE
SYNTAX FcBbCredit
UNITS
"buffers"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum number of receive buffers available for holding
Class 1 connect-request, Class 2 or Class 3 frames from the
attached NxPort."
-- 1.3.6.1.2.1.75.1.5.1.1.4 -- ::= { fcFxPortCapEntry 4 }
fcFxPortCapRxDataFieldSizeMax OBJECT-TYPE
SYNTAX FcRxDataFieldSize
UNITS
"bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum size in bytes of the Data Field in a frame that
the FxPort is capable of receiving from its attached
NxPort."
-- 1.3.6.1.2.1.75.1.5.1.1.5 -- ::= { fcFxPortCapEntry 5 }
fcFxPortCapRxDataFieldSizeMin OBJECT-TYPE
SYNTAX FcRxDataFieldSize
UNITS
"bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum size in bytes of the Data Field in a frame that
the FxPort is capable of receiving from its attached
NxPort."
-- 1.3.6.1.2.1.75.1.5.1.1.6 -- ::= { fcFxPortCapEntry 6 }
fcFxPortCapCos OBJECT-TYPE
SYNTAX FcCosCap
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A value indicating the set of Classes of Service that the
FxPort is capable of supporting."
-- 1.3.6.1.2.1.75.1.5.1.1.7 -- ::= { fcFxPortCapEntry 7 }
fcFxPortCapIntermix OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A flag indicating whether or not the FxPort is capable of
supporting the intermixing of Class 2 and Class 3 frames
during a Class 1 connection. This flag is only valid if the
port is capable of supporting Class 1 service."
-- 1.3.6.1.2.1.75.1.5.1.1.8 -- ::= { fcFxPortCapEntry 8 }
fcFxPortCapStackedConnMode OBJECT-TYPE
SYNTAX FcStackedConnMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A value indicating the mode of Stacked Connect request that
the FxPort is capable of supporting."
-- 1.3.6.1.2.1.75.1.5.1.1.9 -- ::= { fcFxPortCapEntry 9 }
fcFxPortCapClass2SeqDeliv OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A flag indicating whether or not the FxPort is capable of
supporting Class 2 Sequential Delivery."
-- 1.3.6.1.2.1.75.1.5.1.1.10 -- ::= { fcFxPortCapEntry 10 }
fcFxPortCapClass3SeqDeliv OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A flag indicating whether or not the FxPort is capable of
supporting Class 3 Sequential Delivery."
-- 1.3.6.1.2.1.75.1.5.1.1.11 -- ::= { fcFxPortCapEntry 11 }
fcFxPortCapHoldTimeMax OBJECT-TYPE
SYNTAX MicroSeconds
UNITS
"microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum holding time (in microseconds) that the FxPort
is capable of supporting."
-- 1.3.6.1.2.1.75.1.5.1.1.12 -- ::= { fcFxPortCapEntry 12 }
fcFxPortCapHoldTimeMin OBJECT-TYPE
SYNTAX MicroSeconds
UNITS
"microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum holding time (in microseconds) that the FxPort
is capable of supporting."
-- 1.3.6.1.2.1.75.1.5.1.1.13 -- ::= { fcFxPortCapEntry 13 }
-- conformance information
fcFeMIBConformance OBJECT IDENTIFIER
-- 1.3.6.1.2.1.75.2 -- ::= { fcFeMIB 2 }
fcFeMIBCompliances OBJECT IDENTIFIER
-- 1.3.6.1.2.1.75.2.1 -- ::= { fcFeMIBConformance 1 }
fcFeMIBGroups OBJECT IDENTIFIER
-- 1.3.6.1.2.1.75.2.2 -- ::= { fcFeMIBConformance 2 }
-- compliance statements
fcFeMIBMinimumCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The minimum compliance statement for SNMP entities
which implement the FIBRE-CHANNEL-FE-MIB."
MODULE
MANDATORY-GROUPS {
fcFeConfigGroup,
fcFeStatusGroup,
fcFeErrorGroup }
OBJECT fcFeFabricName
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT fcFeElementName
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT fcFeModuleName
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT fcFxPortAdminMode
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT fcFxPortPhysAdminStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT fcFxPortPhysRttov
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT fcFxPortBbCreditModel
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
-- 1.3.6.1.2.1.75.2.1.1 -- ::= { fcFeMIBCompliances 1 }
fcFeMIBFullCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The full compliance statement for SNMP entities
which implement the FIBRE-CHANNEL-FE-MIB."
MODULE
MANDATORY-GROUPS {
fcFeConfigGroup,
fcFeStatusGroup,
fcFeErrorGroup,
fcFeCapabilitiesGroup }
GROUP fcFeClass1AccountingGroup
DESCRIPTION
"This group is mandatory for all fibre channel fabric
elements which support class 1 frames."
GROUP fcFeClass2AccountingGroup
DESCRIPTION
"This group is mandatory for all fibre channel fabric
elements which support class 2 frames."
GROUP fcFeClass3AccountingGroup
DESCRIPTION
"This group is mandatory for all fibre channel fabric
elements which support class 3 frames."
OBJECT fcFeFabricName
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT fcFeElementName
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT fcFeModuleName
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT fcFxPortAdminMode
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT fcFxPortPhysAdminStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT fcFxPortPhysRttov
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT fcFxPortBbCreditModel
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
-- 1.3.6.1.2.1.75.2.1.2 -- ::= { fcFeMIBCompliances 2 }
-- units of conformance
fcFeConfigGroup OBJECT-GROUP
OBJECTS {
fcFeFabricName,
fcFeElementName,
fcFeModuleCapacity,
fcFeModuleDescr,
fcFeModuleObjectID,
fcFeModuleOperStatus,
fcFeModuleLastChange,
fcFeModuleFxPortCapacity,
fcFeModuleName,
fcFxPortName,
fcFxPortFcphVersionHigh,
fcFxPortFcphVersionLow,
fcFxPortBbCredit,
fcFxPortRxBufSize,
fcFxPortRatov,
fcFxPortEdtov,
fcFxPortCosSupported,
fcFxPortIntermixSupported,
fcFxPortStackedConnMode,
fcFxPortClass2SeqDeliv,
fcFxPortClass3SeqDeliv,
fcFxPortHoldTime }
STATUS current
DESCRIPTION
"A collection of objects providing the configuration and service
parameters of the Fabric Element, the modules, and FxPorts."
-- 1.3.6.1.2.1.75.2.2.1 -- ::= { fcFeMIBGroups 1 }
fcFeStatusGroup OBJECT-GROUP
OBJECTS {
fcFxPortID,
fcFxPortBbCreditAvailable,
fcFxPortOperMode,
fcFxPortAdminMode,
fcFxPortPhysAdminStatus,
fcFxPortPhysOperStatus,
fcFxPortPhysLastChange,
fcFxPortPhysRttov,
fcFxPortFcphVersionAgreed,
fcFxPortNxPortBbCredit,
fcFxPortNxPortRxDataFieldSize,
fcFxPortCosSuppAgreed,
fcFxPortIntermixSuppAgreed,
fcFxPortStackedConnModeAgreed,
fcFxPortClass2SeqDelivAgreed,
fcFxPortClass3SeqDelivAgreed,
fcFxPortNxPortName,
fcFxPortConnectedNxPort,
fcFxPortBbCreditModel }
STATUS current
DESCRIPTION
"A collection of objects providing the operational status and
established service parameters for the Fabric Element and the
attached NxPorts."
-- 1.3.6.1.2.1.75.2.2.2 -- ::= { fcFeMIBGroups 2 }
fcFeErrorGroup OBJECT-GROUP
OBJECTS {
fcFxPortLinkFailures,
fcFxPortSyncLosses,
fcFxPortSigLosses,
fcFxPortPrimSeqProtoErrors,
fcFxPortInvalidTxWords,
fcFxPortInvalidCrcs,
fcFxPortDelimiterErrors,
fcFxPortAddressIdErrors,
fcFxPortLinkResetIns,
fcFxPortLinkResetOuts,
fcFxPortOlsIns,
fcFxPortOlsOuts }
STATUS current
DESCRIPTION
"A collection of objects providing various error
statistics detected by the FxPorts."
-- 1.3.6.1.2.1.75.2.2.3 -- ::= { fcFeMIBGroups 3 }
fcFeClass1AccountingGroup OBJECT-GROUP
OBJECTS {
fcFxPortC1InFrames,
fcFxPortC1OutFrames,
fcFxPortC1InOctets,
fcFxPortC1OutOctets,
fcFxPortC1Discards,
fcFxPortC1FbsyFrames,
fcFxPortC1FrjtFrames,
fcFxPortC1InConnections,
fcFxPortC1OutConnections,
fcFxPortC1ConnTime }
STATUS current
DESCRIPTION
"A collection of objects providing various class 1
performance statistics detected by the FxPorts."
-- 1.3.6.1.2.1.75.2.2.4 -- ::= { fcFeMIBGroups 4 }
fcFeClass2AccountingGroup OBJECT-GROUP
OBJECTS {
fcFxPortC2InFrames,
fcFxPortC2OutFrames,
fcFxPortC2InOctets,
fcFxPortC2OutOctets,
fcFxPortC2Discards,
fcFxPortC2FbsyFrames,
fcFxPortC2FrjtFrames }
STATUS current
DESCRIPTION
"A collection of objects providing various class 2
performance statistics detected by the FxPorts."
-- 1.3.6.1.2.1.75.2.2.5 -- ::= { fcFeMIBGroups 5 }
fcFeClass3AccountingGroup OBJECT-GROUP
OBJECTS {
fcFxPortC3InFrames,
fcFxPortC3OutFrames,
fcFxPortC3InOctets,
fcFxPortC3OutOctets,
fcFxPortC3Discards }
STATUS current
DESCRIPTION
"A collection of objects providing various class 3
performance statistics detected by the FxPorts."
-- 1.3.6.1.2.1.75.2.2.6 -- ::= { fcFeMIBGroups 6 }
fcFeCapabilitiesGroup OBJECT-GROUP
OBJECTS {
fcFxPortCapFcphVersionHigh,
fcFxPortCapFcphVersionLow,
fcFxPortCapBbCreditMax,
fcFxPortCapBbCreditMin,
fcFxPortCapRxDataFieldSizeMax,
fcFxPortCapRxDataFieldSizeMin,
fcFxPortCapCos,
fcFxPortCapIntermix,
fcFxPortCapStackedConnMode,
fcFxPortCapClass2SeqDeliv,
fcFxPortCapClass3SeqDeliv,
fcFxPortCapHoldTimeMax,
fcFxPortCapHoldTimeMin }
STATUS current
DESCRIPTION
"A collection of objects providing the inherent
capability of each FxPort within the Fabric Element."
-- 1.3.6.1.2.1.75.2.2.7 -- ::= { fcFeMIBGroups 7 }
END
--
-- Copyright (C) The Internet Society (2000). All Rights Reserved.
--
-- This document and translations of it may be copied and furnished to
-- others, and derivative works that comment on or otherwise explain it
-- or assist in its implementation may be prepared, copied, published
-- and distributed, in whole or in part, without restriction of any
-- kind, provided that the above copyright notice and this paragraph are
-- included on all such copies and derivative works. However, this
-- document itself may not be modified in any way, such as by removing
-- the copyright notice or references to the Internet Society or other
-- Internet organizations, except as needed for the purpose of
-- developing Internet standards in which case the procedures for
-- copyrights defined in the Internet Standards process must be
-- followed, or as required to translate it into languages other than
-- English.
--
-- The limited permissions granted above are perpetual and will not be
-- revoked by the Internet Society or its successors or assigns.
--
-- This document and the information contained herein is provided on an
-- "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING
-- TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
-- BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION
-- HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF
-- MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
--