The MIB module to describe DS0 Bundle interfaces objects. read-write current 1.3.6.1.2.1.10.82.2 This object is used to assist the manager in selecting a value for dsx0BundleIndex. Because this object is of syntax TestAndIncr (see the SNMPv2-TC document, RFC 1903) it can also be used to avoid race conditions with multiple managers trying to create rows in the table. If the result of the SET for dsx0BundleNextIndex is not success, this means the value has been changed from index (i.e. another manager used the value), so a new value is required. The algorithm is: done = false while done == false index = GET (dsx0BundleNextIndex.0) SET (dsx0BundleNextIndex.0=index) if (set failed) done = false else SET(dsx0BundleRowStatus.index=createAndGo) if (set failed) done = false else done = true other error handling not-accessible current 1.3.6.1.2.1.10.82.1.1 An entry in the DS0 Bonding table. There is a row in this table for each DS0Bundle interface. read-write current 1.3.6.1.2.1.10.82.2 This object is used to assist the manager in selecting a value for dsx0BundleIndex. Because this object is of syntax TestAndIncr (see the SNMPv2-TC document, RFC 1903) it can also be used to avoid race conditions with multiple managers trying to create rows in the table. If the result of the SET for dsx0BundleNextIndex is not success, this means the value has been changed from index (i.e. another manager used the value), so a new value is required. The algorithm is: done = false while done == false index = GET (dsx0BundleNextIndex.0) SET (dsx0BundleNextIndex.0=index) if (set failed) done = false else SET(dsx0BundleRowStatus.index=createAndGo) if (set failed) done = false else done = true other error handling not-accessible current 1.3.6.1.2.1.10.82.3.1 There is a row in entry in this table for each ds0Bundle interface. read-write current 1.3.6.1.2.1.10.82.1.1.1 This object indicates which BONDing mode is used, if any, for a ds0Bundle. Mode0 provides parameter and number exchange with no synchronization. Mode 1 provides parameter and number exchange. Mode 1 also provides synchronization during initialization but does not include inband monitoring. Mode 2 provides all of the above plus inband monitoring. Mode 2 also steals 1/64th of the bandwidth of each channel (thus not supporting n x 56/64 kbit/s data channels for most values of n). Mode 3 provides all of the above, but also provides n x 56/64 kbit/s data channels. Most common implementations of Mode 3 add an extra channel to support the inband monitoring overhead. ModeNone should be used when the interface is not performing bandwidth-on-demand. 1 2 3 4 5 6 read-only current 1.3.6.1.2.1.10.82.1.1.2 This object indicates the current status of the bonding call using this ds0Bundle. idle(1) should be used when the bonding mode is set to none(1). 1 2 3 read-write current 1.3.6.1.2.1.10.82.1.1.3 This object is used to create new rows in this table, modify existing rows, and to delete existing rows. 1 2 -- the following value is a state: -- this value may be read, but not written 3 -- the following three values are -- actions: these values may be written, -- but are never read 4 5 6 read-only current 1.3.6.1.2.1.10.82.3.1.2 The ifIndex value the agent selected for the (new) ds0Bundle interface. "d" read-write current 1.3.6.1.2.1.10.82.3.1.3 This variable contains the transmission vendor's circuit identifier, for the purpose of facilitating troubleshooting. "255a" read-write current 1.3.6.1.2.1.10.82.3.1.4 This object is used to create and delete rows in this table. 1 2 -- the following value is a state: -- this value may be read, but not written 3 -- the following three values are -- actions: these values may be written, -- but are never read 4 5 6