The MIB module for managing the collection and storage of accounting information for connections in a connection- oriented network such as ATM. not-accessible current 1.3.6.1.2.1.60.1.1.1.1 An entry identifying an (subtree, list) tuple used to select a set of accounting information which is to be collected. not-accessible current 1.3.6.1.2.1.60.1.2.1.1 An entry identifying a file into which accounting information is to be collected. read-write current 1.3.6.1.2.1.60.1.3.1 A control object to indicate the administratively desired state of the collection of accounting records across all interfaces. Modifying the value of acctngAdminStatus to 'disabled' does not remove or change the current configuration as represented by the active rows in the acctngSelectionTable, acctngFileTable and acctngInterfaceTable tables. 1 2 read-only current 1.3.6.1.2.1.60.1.3.2 A status object to indicate the operational state of the collection of accounting records across all interfaces. When the value of acctngAdminStatus is modified to be 'enabled', the value of this object will change to 'enabled' providing it is possible to begin collecting accounting records. When the value of acctngAdminStatus is modified to be 'disabled', the value of this object will change to 'disabled' as soon as the collection of accounting records has terminated. 1 2 read-write current 1.3.6.1.2.1.60.1.3.3 A control object to protect against duplication of control commands. Over some transport/network protocols, it is possible for SNMP messages to get duplicated. Such duplication, if it occurred at just the wrong time could cause serious disruption to the collection and retrieval of accounting data, e.g., if a SNMP message setting acctngFileCommand to 'swapToNewFile' were to be duplicated, a whole file of accounting data could be lost. To protect against such duplication, a management application should retrieve the value of this object, and include in the Set operation needing protection, a variable binding which sets this object to the retrieved value. read-only current 1.3.6.1.2.1.60.1.3.4 An indication of the behaviour mode of the agent when a file becomes full: 'swapOnCommand' - the agent does not automatically swap to a new file; rather, it discards newly collected data until a management application subsequently instructs it to swap to a new file. 'swapOnFull' - the agent terminates collection into the current file as and when that file becomes full. 1 2 read-write current 1.3.6.1.2.1.60.1.3.1 A control object to indicate the administratively desired state of the collection of accounting records across all interfaces. Modifying the value of acctngAdminStatus to 'disabled' does not remove or change the current configuration as represented by the active rows in the acctngSelectionTable, acctngFileTable and acctngInterfaceTable tables. 1 2 read-only current 1.3.6.1.2.1.60.1.3.2 A status object to indicate the operational state of the collection of accounting records across all interfaces. When the value of acctngAdminStatus is modified to be 'enabled', the value of this object will change to 'enabled' providing it is possible to begin collecting accounting records. When the value of acctngAdminStatus is modified to be 'disabled', the value of this object will change to 'disabled' as soon as the collection of accounting records has terminated. 1 2 read-write current 1.3.6.1.2.1.60.1.3.3 A control object to protect against duplication of control commands. Over some transport/network protocols, it is possible for SNMP messages to get duplicated. Such duplication, if it occurred at just the wrong time could cause serious disruption to the collection and retrieval of accounting data, e.g., if a SNMP message setting acctngFileCommand to 'swapToNewFile' were to be duplicated, a whole file of accounting data could be lost. To protect against such duplication, a management application should retrieve the value of this object, and include in the Set operation needing protection, a variable binding which sets this object to the retrieved value. read-only current 1.3.6.1.2.1.60.1.3.4 An indication of the behaviour mode of the agent when a file becomes full: 'swapOnCommand' - the agent does not automatically swap to a new file; rather, it discards newly collected data until a management application subsequently instructs it to swap to a new file. 'swapOnFull' - the agent terminates collection into the current file as and when that file becomes full. 1 2 not-accessible current 1.3.6.1.2.1.60.1.3.5.1 An entry which controls whether accounting data is to be collected on an interface. The types of interfaces which are represented in this table is implementation-specific. read-write current 1.3.6.1.2.1.60.1.4.1 A percentage of the maximum file size at which a 'nearly- full' trap is generated. The value of 0 indicates that no 'nearly-full' trap is to be generated. read-write current 1.3.6.1.2.1.60.1.4.2 An indication of whether the acctngFileNearlyFull and acctngFileFull traps are enabled. 1 2 read-write current 1.3.6.1.2.1.60.1.4.1 A percentage of the maximum file size at which a 'nearly- full' trap is generated. The value of 0 indicates that no 'nearly-full' trap is to be generated. read-write current 1.3.6.1.2.1.60.1.4.2 An indication of whether the acctngFileNearlyFull and acctngFileFull traps are enabled. 1 2 read-write current 1.3.6.1.2.1.60.1.1.1.1.2 The combination of acctngSelectionSubtree and acctngSelectionList specifies one (subtree, list) tuple which is to be collected. read-write current 1.3.6.1.2.1.60.1.1.1.1.3 The combination of acctngSelectionSubtree and acctngSelectionList specifies one (subtree, list) tuple which is to be collected. read-write current 1.3.6.1.2.1.60.1.1.1.1.4 An indication of the file into which the accounting information identified by this entry is to be stored. If there is no conceptual row in the acctngFileTable for which the value of acctngFileIndex has the same value as this object, then the information selected by this entry is not collected. read-write current 1.3.6.1.2.1.60.1.1.1.1.5 Indicates the types of connections for which the information selected by this entry are to be collected. 0 1 2 3 4 5 6 7 8 9 read-write current 1.3.6.1.2.1.60.1.1.1.1.6 The status of this conceptual row. An agent may refuse to create new conceptual rows and/or modify existing conceptual rows, if such creation/modification would cause multiple rows to have the same values of acctngSelectionSubtree and acctngSelectionList. A conceptual row can not have the status of 'active' until values have been assigned to the acctngSelectionSubtree, acctngSelectionList and acctngSelectionFile columnar objects within that row. An agent must not refuse to change the values of the acctngSelectionSubtree, acctngSelectionList and acctngSelectionFile columnar objects within a conceptual row even while that row's status is 'active'. Similarly, an agent must not refuse to destroy an existing conceptual row while the file referenced by that row's instance of acctngSelectionFile is in active use, i.e., while the corresponding instance of acctngFileRowStatus has the value 'active'. However, such changes only take effect upon the next occasion when collection begins into a new (version of the) file. 1 2 -- the following value is a state: -- this value may be read, but not written 3 -- the following three values are -- actions: these values may be written, -- but are never read 4 5 6 read-write current 1.3.6.1.2.1.60.1.2.1.1.2 The name of the file into which accounting data is to be stored. If files are named using suffixes, then the name of the current file is the concatenation of acctngFileName and acctngFileNameSuffix. An agent will respond with an error (e.g., 'wrongValue') to a management set operation which attempts to modify the value of this object to the same value as already held by another instance of acctngFileName. An agent will also respond with an error (e.g., 'wrongValue') if the new value is invalid for use as a file name on the local file system (e.g., many file systems do not support white space embedded in file names). The value of this object can not be modified while the corresponding instance of acctngFileRowStatus is 'active'. "255a" read-only current 1.3.6.1.2.1.60.1.2.1.1.3 The suffix, if any, of the name of a file into which accounting data is currently being stored. If suffixes are not used, then the value of this object is the zero-length string. Note that if a separator, such as a period, is used in appending the suffix to the file name, then that separator appears as the first character of this value. "255a" read-write current 1.3.6.1.2.1.60.1.2.1.1.4 The textual description of the accounting data which will be stored (on the next occasion) when header information is stored in the file. The value of this object may be modified at any time. "255a" read-write current 1.3.6.1.2.1.60.1.2.1.1.5 A control object for the collection of accounting data. When read the value is either 'idle' or 'cmdInProgress'. Writing a value is only allowed when the current value is 'idle'. When a value is successfully written, the value changes to 'cmdInProgress' until completion of the action, at which time the value reverts to 'idle'. Actions are invoked by writing the following values: 'swapToNewFile' - the collection of data into the current file is terminated, and collection continues into a new (version of the) file. 'collectNow' - the agent creates and stores a connection record into the current file for each active connection having a type matching acctngSelectionType and an age greater than acctngFileMinAge. 1 2 -- the following two values are actions: -- they may be written, but are never read 3 4 read-write current 1.3.6.1.2.1.60.1.2.1.1.6 "bytes" The maximum size of the file (including header information). When the file of collected data reaches this size, either the agent automatically swaps to a new version (i.e., a new value acctngFileNameSuffix) of the file, or new records are discarded. Since a file must contain an integral number of connection records, the actual maximum size of the file may be just less OR Just greater than the value of this object. The value of this object can not be modified while the corresponding instance of acctngFileRowStatus is 'active'. The largest value of the maximum file size in some agents will be less than 2147483647 bytes. read-only current 1.3.6.1.2.1.60.1.2.1.1.7 "bytes" The current size of the file into which data is currently being collected, including header information. read-write current 1.3.6.1.2.1.60.1.2.1.1.8 An indication of the format in which the accounting data is to be stored in the file. If the value is modified, the new value takes effect after the next 'swap' to a new file. The value ber(2) indicates the standard format. 1 2 read-write current 1.3.6.1.2.1.60.1.2.1.1.9 An indication of when accounting data is to be written into this file. Note that in addition to the occasions indicated by the value of this object, an agent always writes information on appropriate connections to the file when the corresponding instance of acctngFileCommand is set to 'collectNow'. - 'onRelease' - whenever a connection (or possibly, connection attempt) is terminated, either through a Release message or through management removal, information on that connection is written. - 'periodically' - information on appropriate connections is written on the expiry of a periodic timer, This value may be modified at any time. 0 1 read-write current 1.3.6.1.2.1.60.1.2.1.1.10 An indication of whether connection data is to be collected for failed connection attempts when the value of the corresponding instance of acctngFileCollectMode includes 'onRelease'. The individual values have the following meaning: 'soft' - indicates that connection data is to be collected for failed Soft PVCs/PVPs which originate or terminate at the relevant interface. 'regular' - indicates that connection data is to be collected for failed SVCs, including Soft PVCs/PVPs not originating or terminating at the relevant interface. This value may be modified at any time. 0 1 read-write current 1.3.6.1.2.1.60.1.2.1.1.11 "seconds" The number of seconds between the periodic collections of accounting data when the value of the corresponding instance of acctngFileCollectMode includes 'periodically'. Some agents may impose restrictions on the range of this interval. This value may be modified at any time. read-write current 1.3.6.1.2.1.60.1.2.1.1.12 "seconds" The minimum age of a connection, as used to determine the set of connections for which data is to be collected at the periodic intervals and/or when acctngFileCommand is set to 'collectNow'. The age of a connection is the elapsed time since it was last installed. When the periodic interval expires for a file or when acctngFileCommand is set to 'collectNow', accounting data is collected and stored in the file for each connection having a type matching acctngSelectionType and whose age at that time is greater than the value of acctngFileMinAge associated with the file. This value may be modified at any time. read-write current 1.3.6.1.2.1.60.1.2.1.1.13 The status of this conceptual row. This object can not be set to 'active' until a value has been assigned to the corresponding instance of acctngFileName. Collection of data into the file does not begin until this object has the value 'active' and one or more (active) instances of acctngSelectionFile refer to it. If this value is modified after a collection has begun, collection into this file terminates and a new (or new version of the) file is immediately made ready for future collection (as if acctngFileCommand had been set to 'swapToNewFile'), but collection into the new (or new version of the) file does not begin until the value is subsequently set back to active. 1 2 -- the following value is a state: -- this value may be read, but not written 3 -- the following three values are -- actions: these values may be written, -- but are never read 4 5 6 read-write current 1.3.6.1.2.1.60.1.3.5.1.1 Indicates whether the collection of accounting data is enabled on this interface. 1 2 The list component of a (subtree, list) tuple. Such a (subtree, list) tuple defines a set of objects and their values to be collected as accounting data for a connection. The subtree specifies a single OBJECT IDENTIFIER value such that each object in the set is named by the subtree value appended with a single additional sub-identifier. The list specifies a set of data items, where the presence of an item in the list indicates that the item is (to be) present in the data collected for a connection; the absence of an item from the list indicates that the item is not (to be) present in the data collected for a connection. Each data item is represented by an integer which when appended (as as additional sub-identifier) to the OBJECT IDENTIFIER value of the subtree identified by the tuple, is the name of an object defining that data item (its description and its syntax). The list is specified as an OCTET STRING in which each data item is represented by a single bit, where data items 1 through 8 are represented by the bits in the first octet, data items 9 through 16 by the bits in the second octet, etc. In each octet, the lowest numbered data item is represented by the most significant bit, and the highest numbered data item by the least significant bit. A data item is present in the list when its bit is set, and absent when its bit is reset. If the length of an OCTET STRING value is too short to represent one or more data items defined in a subtree, then those data items are absent from the set identified by the tuple of that subtree and that OCTET STRING value. The subtree component of a (subtree, list) tuple. Such a (subtree, list) tuple defines a set of objects and their values to be collected as accounting data for a connection. The subtree specifies a single OBJECT IDENTIFIER value such that each object in the set is named by the subtree value appended with a single additional sub-identifier. An arbitrary integer value identifying a file into which accounting data is being collected.